Top Mount Barn Door Installation Guide

This installation guide is for the Urban Woodcraft Top Mount Barn Doors. We recommend seeking a licensed professional to install your barn door for optimal results.

Go to Guide Download PDF
Urban Woodcraft

Need Help? Get in Touch

Get Support
Technical drawing of a sliding door system, showing dimensions and installation instructions. The rail is 78.75 inches wide and must be mounted to wall studs. The door height=
Technical diagram of a door closer with measurements. The door closer's height=
Illustration showing a toolbox, pencil, screwdriver, three drill bits (sizes 2, 4, and 6), electric drill, measuring tape, wire, screw cap, and a level.
Illustration of a barn door hardware kit parts list, including a ledger board, rails, stoppers, anti-jump block, top roller, wall spacer, roller guides, screws, and anchors.
Diagram showing the installation steps for a sliding door track system. It includes measurements, mounting bracket placement, and instructions to drill 3/16" holes using a power drill.
Diagram showing the installation steps for a sliding door track system. It includes measurements, mounting bracket placement, and instructions to drill 3/16" holes using a power drill.
Diagram showing the assembly of a rail with screws and brackets. Inset images illustrate close-up views of mounting the bracket (fig. 1.2) and adjusting the screws (fig. 1.3).
Step 3 of assembly instructions showing the attachment of a roller bracket to two boards using a 4mm screw. The placement measurements are indicated as 3", 2.15", and 1.2" from the edge.
Diagram showing the assembly of a sliding door with overhead track and wheels. Inset views highlight the placement of the bottom guide and the attachment points for the door rollers.

Get Support for Your Barn Door

Contact Form